Namespace focas

address Type G (Output signal from PMC to CNC), F (Input signal to PMC from CNC), Y (Output signal to PMC from machine), X (Input signal from PMC to machine), A (Message display), R (Internal relay), T (Timer), K (Keep relay), C (Counter), D (Data table), M (Input signal from other PMC path), N (Output signal to other PMC path), E (Extra relay), Z (System relay)

bit offset (0 ~ 7(

Length of data to read(less than 5). In case of bit type, this value is ignored.

type. 0:bit(1bit), 1:char(1byte), 2:word(2byte), 3:long(4byte), 4:float(4byte), 5:double(8byte)

ip address

port No

start address number (0 ~ 9999)

connection timeout. 0(wait indefinitely) or greater than 0

address Type G (Output signal from PMC to CNC), F (Input signal to PMC from CNC), Y (Output signal to PMC from machine), X (Input signal from PMC to machine), A (Message display), R (Internal relay), T (Timer), K (Keep relay), C (Counter), D (Data table), M (Input signal from other PMC path), N (Output signal to other PMC path), E (Extra relay), Z (System relay)

bit offset (0 ~ 7(

type. 0:bit(1bit), 1:char(1byte), 2:word(2byte), 3:long(4byte), 4:float(4byte), 5:double(8byte)

ip address

port No

start address number (0 ~ 9999)

timeout. 0(wait indefinitely) or greater than 0

The data to be write. The bit type has only one data value.(length is 1) Other types send data as an array(less than 5).